Evido EAD-D2000 Manuale Scaricare il pdf (Pagina 88)

Your encoder or IP camera could encounter an unexpected occasion such as broken firmware

file or uncompleted loading of firmware file during system booting. To restore the device after

the emergency cases, the device provides the emergency firmware as a factory default. Your

device will get restarted with Safety Mode when there is any error on your booting system files.

Normally, the cause of ‘safety mode’ is classified into 3 types.

* When the power supply is unplugged in the middle of system booting.

* When the firmware files required for system booting are damaged.

* When a user has not completed the booting files system and try to boot the system (Applied

only for the case of Server Side SDK user)

IMPORTANT : The device does not turn into the safety mode booting until 5 times of normal

booting are tried.

If you see the screen above, that means your device has rebooted at ‘Safety Mode’ and you

should follow the steps.

1. Click the ‘Reboot’ button on the webpage.

2. Wait for about 1 minute until the system gets restarted at normal condition.

3. Try to access the webpage again and check out if it displays the webpage in normal.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 94 95 96

Nessun commento

Evido EAD-D2000 Manuale Pagina 88